GGR Supplies T.R.U. REF-7 Orange Engineering Grade Reflective Tape: 4 in. Wide x 30 ft. Length

T.R.U. REF-7 Color Engineering Grade Reflective TapeProduct DescriptionT.R.U. REF-7 Reflective Tape is 5.5 mils thick with Enclosed Lens Retroreflective Urethane Film coated with a permanent Acrylic Adhesive. Application surface should be flat (not recommended for unpainted stainless steel surface). Product may be screen printed, guillotine cut, die-cut, or thermal kiss-cut. Meets or exceeds requirements of Federal Specification LS-300C (Reflectivity 1, Class 1), FP-85 (Type II), and ASTM D4956-94 (Type 1).6 Colors available Silver/White - Yellow - Red - Green - Orange - Blue Rainbow Pack Carries Silver/White - Yellow - Red - Green - Orange - BlueApplications Primarily designed for permanent and temporary traffic signage; also is used for safety applications and for the entertainment industry. Properties Adhesive: Acrylic Carrier/Backing: Enclosed lens retroreflective urethane film Thickness: 5.5 mils (carrier + adhesive) Adhesion: 50 oz/in (to stainless steel test panel) Application Temperature: +40 F Service Temperature Range: -40 F to +180 F Application temperature range: 32 F to 140 F Dimensional Stability: Less than 0.02 in. (0.8mm) shrinkage (1000 hours Atlas Twin Arch Weatherometer, EH) Certifications: LS-300C (Reflectivty 1 Class 1), FP-85 (Type II), ASTM D4956-94 (Type 1) 3" neutral core/cartonAlternative to Avery T-1500 Series, Nippon/Carbide 8100 Series, 3M 3200 Series.Note: Sizes will be the tape industry standard metric sizes, ex. 12mm for every 1/2 inch of nominal value tape width (Rolls are give or take 5% wider or narrower than the nominal size).

• Thickness: 5.5 MIL With Enclosed Lens Retroreflective Urethane Film Coated With a Aermanent Acrylic Adhesive.
• Meets or exceeds requirements of Federal Specification LS-300C (Reflectivity 1, Class 1), FP-85 (Type II), and ASTM D4956-94 (Type 1).
• Primarily designed for permanent and temporary traffic signage.
• Temperature Range resistance: -40 F to +140 F (40 C to 82 C).
• Adhesion: 24 hours dwell time, but in 15 minutes adhesive will reach 75%.